The concrete floor has very good decorative performance on all floors, but the crevices of concrete cuts are very easy to contain dirt and dirt, and they are subject to aging during long-term use.
Weathering, and external friction and impact, etc., will cause serious dust and dirt pollution on the concrete floor. If you encounter this situation, you must use a concrete grinder during the construction process to treat the concrete floor in time. Maxkpa concrete grinder can solve all the problems above.
The concrete grinder is used to grind and solidify the concrete floor:
1. Base surface cleaning
Clean up the ground garbage, check the ground condition and remove hard materials such as expansion screws.2. rough grinding and leveling
Use a multifunctional floor grinder with a metal grinding pad to dry the ground until the concrete surface is even and smooth, and the ground dust is cleaned.
3. The penetration of concrete curing agent
Before applying the curing agent, use a vacuum cleaner to clean the ground, or use a dust pusher to clean the ground, and then spray platinum concrete curing agent.
4. Fine grinding
After confirming that the concrete curing agent is completely dry, use a multifunctional concrete grinder with a resin polishing pad to further grind and polish the ground.
5. Fine throwing
Use clean dry dust to push the floor clean, and then polish it with a high-speed polishing pad, and the brightness will be higher if the protective agent is applied before polishing.
The treated concrete floor has changed from dust, sand, stains, dull and dull to clean and dust-free, compressive and wear-resistant, bright as a mirror, and very easy to clean. There is a big difference between the front and the back of the ground and the curing effect is obvious.
Publication Date: 25 January, 2021
Category:
Concrete Floor Grinder
